Produktai skirti apdorojimo užsakymų grąžinimas (3472)

The transducer unit µCAN.8.ti-SNAP is equipped with 8 inputs for thermocouples or Pt100 sensors. The integrated CAN interface supports CANopen and J1939 protocols. Bit rate and node-ID may be set via DIP switches inside the device or via LSS. Temperature thermo type J, K, L, N, R, T:Temperature Pt100/Pt1000 (2-wire) Accuracy +/- 0.5 K (Thermo):Accuracy +/- 0.2 K (Pt100) Resolution 16-bit (0.1 °C):Sampling rate 20 ms / 50 Hz Sensor error detection:Protocol CAN / CANopen / Raw CAN / J1939

Modern operating tables are miracles of precision. In laser eye surgery an accuracy to one thousandth of a millimetre is crucial. For other operation methods, lighting of the operating area is important. Also, smooth and precise movement of the operating table as well as reliability and durability of respirators are essential features. And precision is a matter of life and death. MicroControl has a long-term expertise in this kind of challenging applications and provides highly reliable solutions for medical equipment with precise control units and bus technology.

The µCAN.8.dio-SNAP is a freely configurable digital I/O module featuring 8 channels. Module ID and bit rate can be set via DIP switch or via CAN bus (LSS, CiA 305). The module supports the protocols CANopen CANopenFD and J1939. Digital input or output:Input or output freely configurable Output drivers can be supplied separately:Each output to be charged with max. 1 A Each output to be charged with max. 1 A:Fieldbus CAN / CAN FD Protocol CANopen / CANopen FD:Protocol CANopen / CANopen FD

Silicone conveyor belt 1-ply light blue

KEIPER conveyor belts are made of fully synthetic polyester or blended fabrics and can be adapted for a specific purpose by means of different designs as well as appropriate coatings and surface structures. The wide range of possible materials and designs takes into account such varied requirements as: High entrainment adhesion or low adhesion (accumulation mode) FDA/USDA approved and in conformity with EU Directive 2007/19/EC Colors white, petrol, black, green and special colors Anti-static designs and suitable for use in metal detectors Special resistance against wear and chemicals High and low temperatures Stress-strain behavior and tensile strength Drum diameter (e.g. blade edges) Hence, the conveyor belts always are designed for the intended application.

The cable transmitter µCAN.1.sg-TRS is the universal data acquisition module for standard analogue full bridge strain gauge signals. The bridge is powered via the transmitter. The TRS family is ideally suited for being integrated directly in the measuring lines at a short distance from the sensor. Voltage ± 20 mV:Supply voltage 4.5 V Strain gauge full bridge:Accuracy 0.2% (FS) Resolution 16-bit (1 µV):Sampling rate up to 1kHz Fieldbus CAN classic / CAN FD:Protocol CANopen / CANopen FD / J1939

The SAE J1939 standard (Serial Control and Communications Heavy Duity Vehicle Network) has originally been designed by SAE International to be used in heavy duty vehicles. In the meantime, the protocol is widely used also in agricultural machinery, rail vehicles and sea vessels and in a wide range of diesel-driven machinery. Target group J1939 training The target group of the J1939 intensive workshop is development engineers who are looking for a quick start into handling the communications profile or would like to get an insight into the J1939 protocol stack. Also, we address decision makers and product managers to enable them to assess the suitability of the J1939 protocol stack for their applications.

Equipped with CAN or CANopen interfaces and a 19″ slide-in casing, the MicroControl µLAB is particulary suitable for measuring electric, thermal and mechanic signals in engine or components testing facilities. The signal wires are connected to the module by plug-in connectors in the front plate. Temperature thermo type K:Accuracy +/- 0.5 K Resolution 16-bit (0.1 °C):Sampling rate 10 ms / 100 Hz Sensor error detection:Equipped with cold-junction compensation Operating temperatures -40…+85 °C:Power supply voltage 9…36 V DC Fieldbus CAN:Protocol CANopen / Raw CAN

PU conveyor belt 1-ply white

The modul µCAN.4.ao-SNAP features four independent analogue outputs which optionally provide a voltage or a current signal. The CAN interface supports CANopen and J1939 protocols. Voltage +/- 10 V:Current 0(4)…20 mA Accuracy 0.05 % (FS):Resolution 16-bit (1 mV / 1 µA) Signal output 1 ms / 1 kHz:Signal type freely configurable Fieldbus CAN:Protocol CANopen / Raw CAN / J1939

Linux is an open operating system. The term “Linux” actually refers to the Kernel of a unix-related operating systemes (derivative). The term is often used as a synonym for the complete operating system (distribution). Further to the programmes necessary in an operating system, e.g. for file and user management, additional graphic frontends, office applications, multi media tools, databases, web browsers and other programmes are covered. Linux is freely available, i.e. the sources are open and the systems may easily be adapted to the individual application. Linux is freely copiable and there are no software license fees and, in addition, it is non-proprietary.

The µCAN.8.pwm-SNAP unit is equipped with 8 outputs which provide pulse width modulated signals (PWM) within the range of 0% to 100% for controlling of actuators (valves etc.) PWM output:Basic frequency 40 Hz … 5 kHz Mark-to-space ratio 0.0 % … 100.0 %:Each output to be charged with max. 1.4 A Fieldbus CAN:Protocol CANopen / Raw CAN

The cable transmitter µCAN.1.ti-TRS is designed for the acquisition of one temperature signal and its digitization for being processed via CAN bus. The TRS module is integrated directly in the measurement line at a short distance from the source to avoid interference effectively. Temperature Thermo type J, K, L:Temperature Pt100, Pt1000 (2-wire) Accuracy ± 0.5 K (Thermo):Accuracy ± 0.2 K (Pt100) Resolution 16-bit (0.1 °C):Sampling rate up to 1 kHz Fieldbus CAN classic / CAN FD:Protocol CANopen / CANopen FD / J1939

With CANopen, the user organization CAN in Automation (CiA) has created a protocol standard which has widely spread in embedded systems and mechanical engineering. CANopen specifications not only define various services for data exchange, they also specify standardized access to the systems via device profiles and application profiles. Target group CANopen training The target group of the CANopen workshop is development engineers who are looking for detailed knowledge about the communication profile or would like to get an insight in the CANopen / CANopen FD protocol stacks.

The µCAN.4.ci-BOX is equipped with 4 fast counters of up to 100 kHz. The CAN module acquires and processes the binary pulses and transmits them to a higher-level system. Counter input / frequency measurement:A/B signal Max. input frequency 500 kHz:High precision frequency measurement Signal type freely configurable:Up or down counter Fieldbus CAN:Protocol CANopen / Raw CAN

PVC conveyor belt 2-ply

Polyester felt belt antistatic

PU conveyor belt 2-ply white, fabric

PVC conveyor belt 2-ply black mat

PU conveyor belt 1-ply white

The KEIPER belt series RAPID conveyor and process belts is available in polyester, cotton or blended fabrics, with special coatings such as neoprene, silicone, non-woven fabric and many more, in a wide range of colors suitable for the specific application, and different surface structures. The wide range of possible materials and designs takes into account such varied requirements as: High entrainment adhesion or low adhesion (accumulation mode) FDA/USDA approved and in conformity with EU Directive 2007/19/EC Colors white, petrol, black, green and special colors Anti-static designs and suitability for use in metal detectors Special resistance against wear and chemicals High and low temperatures Stress-strain behavior and tensile strength Drum diameter (e.g. blade edges) Hence, the conveyor belts always are designed for the intended application.

The Keiper UNITRANS conveyor belt series can be fitted with numerous different entraining elements and tracking guides. Entraining elements are used for ascending or descending conveyor systems, linear movements and when lateral forces occur. With these elements it is easier to carry along, transport and place the products to be conveyed. Tracking guides are used to ensure directionally correct and stable guiding of the belt on the conveying system and to prevent the conveyor belt from running off. Conveyor belt entraining element or tracking guides made of PVC and PU in blue, white, green, petrol or transparent. V-shape, rectangular or block tracking guides. Smooth or notched design. Depending on the design, oil and grease resistant, with FDA/EU approval.

PVC conveyor belt 2-ply light blue, structure Längsrille

Overview to the technical datas of KEIPER conveyor belt product range RAPID

PU conveyor belt 1-ply white

PU conveyor belt 2-ply light blue

Die LUMIMAX® LED-Ringbeleuchtung eignet sich zur gleichmäßigen Ausleuchtung flacher, diffuser oder reflektierender Oberflächen. Die Ringbeleuchtung wird dafür typischerweise direkt an der Kamera oder am Objektiv befestigt. Die Verwendung von Diffusorscheiben, Fresnellinsen oder Polarisationsfiltern ermöglicht wahlweise eine sehr gerichtete oder diffuse Ausleuchtung der Prüfobjekte, auch bei größeren Arbeitsabständen. Die LUMIMAX® LED-Ringbeleuchtung ist für den Permanentbetrieb oder für den Blitzbetrieb verfügbar. Die High Power Ringstrahler der LR-Serie sind extrem lichtstark und garantieren eine ausgezeichnete Beleuchtung von Inspektionsobjekten auch bei einem Arbeitsabstand von mehreren Metern. Das mechanische Design des Miniaturringlichts LSR24 der LSR-Serie ermöglicht eine direkte Objektivmontage und leuchtet Prüfbereiche mit mittlerer Entfernung (< 1 m) gut aus. Lichtfarbe:Weiß, Rot, Infrarot, Blau, Grün, UV Betriebsart:Permanent/ Schalten oder Blitz Schutzart:IP64

Durch den modularen Aufbau sowie umfangreiches Zubehör lässt sich die hochflexible High-Performance-Beleuchtung LQHP80 von einem gerichteten Auflicht zu einem diffusen oder kollimierten Durchlicht umfunktionieren. Zusätzlich kann der Abstrahlwinkel durch den Austausch eines kompletten Lens Arrays an Größe und Abstand des Prüfobjekts adaptiert werden. Das kompakte Gehäuse hält mit Schutzart IP64 den Einflüssen anspruchsvoller Industrieumgebungen stand und ist dank 3D-Kabelauslass selbst in einem stark begrenzten Bauraum flexibel einsetzbar. Mit der integrierten Controller-Technologie zum wahlweise permanenten, geschalteten oder geblitzten Betrieb ist bei Auflichtanwendungen eine Beleuchtungsstärke von mehr als 5 Millionen lx realisierbar. Lichtfarbe:Weiß, Rot, Infrarot, Blau, Grün Betriebsart:Permanent/ Schalten oder Blitz Schutzart:IP64 Lichtführung:Diffus oder kollimiert

Bearbeitungszeiten reduzieren durch smartes Hochvolt Kabel Konfektionieren Mit der EM 600 können bis zu 6 aufeinanderfolgende Prozesswerkzeuge für die HV Kabelverarbeitung in einer Station kombiniert werden. Nach dem Einsetzen bleibt das Kabel in einer festen Position, während die Werkzeuge sich zum Kabel bewegen, um die HV Kabel optimal zu schützen. Die Gesamtzykluszeit einer Kabelkonfektion der EM 600 Station beträgt ca. 35 s für alle Abläufe. Dabei kann die Station jährlich ca. 400.000 Hochvolt Kabel konfektionieren. Hierdurch reduziert sich nicht nur die Bearbeitungszeit der HV Kabel, auch der Personalbindungsfaktor sinkt um ca. 30%. HERKUNFTSLAND:Deutschland

Die In-Sight 7900 Serie ist ein hochauflösendes, flexibles Bildverarbeitungssystem für zuverlässige Inspektionen selbst bei hoher Produktionsliniengeschwindigkeit. Die austauschbaren, vom Anwender an der LInie konfigurierbaren Beleuchtungs- und Optikmodule (Flexible Image Technology™) bieten höchste Flexibilität bei der Anpassung des Systems an die jeweilige Anwendung. Die In-Sight® 7000 Serie ist mit dem ganzen Paket leistungsstarker Bildverarbeitungs-Algorithmen von Cognex ausgestattet und besitzt praktische Features, wie z. B. einen gut sichtbaren Pass/Fail-LED-Anzeigering rund um das Kameragehäuse, einen SD-Karten-Slot und ein Gehäuse nach IP67-Standard. Relative Verabeitungsgeschwindigkeit:2,5X Auflösung:800 x 600, 640 x 480 Bildfrequenz:217/165 (Schwarzweiß), 134/100 (Farbe) Tools:Blob, Edge, Histogramm, ID, Filter, InspectEdge, OCR/OCV, Muster, PatMax, Geometrie und Kalibrierung Tool-Optionen:PatMax RedLine Software-Schnittstelle:In-Sight Explorer Spreadsheet und EasyBuilder Schnittstelle